AZS IEC 60238:2026 (Blocked) Edison vintli lampalar üçün patronlar (lampatutucular)

Annotation Preview

This International Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires1 only. It also applies to switched-lampholders for use in AC circuits only, where the working voltage does not exceed 250 V r.m.s. This standard also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 25 V, to be used indoors, and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 60 V, to be used indoors or outdoors. It also applies to lampholders E10 for building-in, for the connection of single lamps to the supply. These lampholders are not intended for retail sale. As far as it reasonably applies, this standard also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply. NOTE This type of lampholder is for example used in Christmas tree lighting chains. As far as it reasonably applies, this standard also covers adapters. This standard also covers lampholders which are, wholly or partly, integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals or of the lamp cap, the requirements of the relevant appliance standard are observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Such lampholders as well as lampholders provided with a snap-on outer shell, for use by luminaire manufacturers only, are not for retail sale. This standard applies to lampholders to be used indoors or outdoors in residential as well as in industrial lighting installations. It also applies to candle lampholders. In locations where special conditions prevail, as for street lighting, on board ships, in vehicles and in hazardous locations, for example where explosions are liable to occur, special constructions may be required. This standard does not apply to three-light lampholders E26d.
Keywords: lampalar, patronlar (lampatutucular), edison vintli lampalar
GeneralInformation
Status: Blocked ChangeNumber: InternationalClassificationCodeOfStandards: 29.140.10 TechnicalCommittee: AZSTAND/TK 46 ActivatedDate: 02.07.2026 PagesCount: 103 Language: az IsReferenceStandard: No
Substitutions

Previously

Withdrawn

AZS IEC 60238:2026

Now

Active

AZS IEC 60238:2026 (IEC 60238:2016 +AMD1:2017+AMD2:2020)

BuyStandard

AlsoInterestYou
AZS AZS IEC 60238:2026 (IEC 60238:2016 +AMD1:2017+AMD2:2020)
Language: en PublishedDate: 08.07.2026 ActivatedDate: 08.07.2026 ChangeNumber:
Edison vintli lampalar üçün patronlar (lampatutucular)
Details AddToCart
AZS AZS ECE 37:2026 (UN Regulation N=37)
Language: az PublishedDate: 03.04.2026 ActivatedDate: 03.04.2026 ChangeNumber:
Mexaniki nəqliyyat vasitələrinin və onların qoşqularının təsdiq edilmiş fənərlərində istifadəsi üçün nəzərdə tutulmuş közərmə lampalarının rəsmi təsdiqinə dair vahid müddəalar
Details AddToCart
AZS AZS ECE 112:2026
Language: az PublishedDate: 16.04.2026 ActivatedDate: 16.04.2026 ChangeNumber:
Asimmetrik keçid şuası və ya hərəkət şüası və ya hər ikisini yayan və filament lampaları və ya işıq saçan diod (LED) modulları ilə təchiz edilmiş avtomobil faralarının təsdiqi ilə bağlı vahid müddəalar
Details AddToCart