ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure

Annotation Preview

This part of ISO 8503 specifies the stylus instrument and describes the procedure for calibrating ISO surface profile comparators conforming to the requirements of ISO 8503‑1. This part of ISO 8503 is also applicable to the determination of the surface profile, within the range Ry5 = 20 μm to Ry5 = 200 μm, of essentially planar blast-cleaned steel. The determination can be carried out on a representative section of the blast-cleaned surface or, if direct observation of the surface is not feasible, on a replica of the surface (see Annex C). NOTE Where appropriate, this procedure can be used to assess the roughness profile of other abrasive blastcleaned substrates. An alternative procedure is described in ISO 8503‑3.
Keywords: paints, steel substrates, surface profile comparators, calibration
GeneralInformation
Status: NotTemporaryActive ChangeNumber: InternationalClassificationCodeOfStandards: 25.220.10 TechnicalCommittee: ISO/TC 35/SC 12 ActivatedDate: 22.02.2012 PagesCount: 15 Language: en

BuyStandard

Price 129.57 AZN

VAT 23.32 AZN

Sum 152.89 AZN

AddToCart

AlsoInterestYou
ISO ISO 8502-3:2017
Language: en PublishedDate: 10.01.2027 ActivatedDate: 10.01.2027 ChangeNumber:
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Details AddToCart