ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile

Annotation Preview

ISO 8503-5:2017 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2. The method uses replica tape and a suitable gauge for measuring, on site, the roughness of a surface before the application of paint or another protective coating. The method is applicable within the range of profile heights cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit measurement of average peak-to-valley profiles of 20 µm to 115 µm. The method is valid for surfaces that have been cleaned with abrasives.
Keywords: steel substrates, determination of the surface profile
GeneralInformation
Status: NotTemporaryActive ChangeNumber: InternationalClassificationCodeOfStandards: 25.220.10 TechnicalCommittee: ActivatedDate: 02.03.2017 PagesCount: 10 Language: en

BuyStandard

Price 123.72 AZN

VAT 22.27 AZN

Sum 145.99 AZN

AddToCart

AlsoInterestYou
ISO ISO 8502-3:2017
Language: en PublishedDate: 10.01.2027 ActivatedDate: 10.01.2027 ChangeNumber:
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Details AddToCart
ISO ISO 8502-4:2017
Language: en PublishedDate: 10.01.2017 ActivatedDate: 10.01.2017 ChangeNumber:
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness Part 4: Guidance on the estimation of the probability of condensation prior to paint application
Details AddToCart