ISO 14567:1999 Personal protective equipment for protection against falls from a height — Single-point anchor devices

Annotation Preview

This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate,of both permanent and temporary single-point anchor devices exclusively for the attachment of personalprotective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travelrestriction (work restraint).It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 andISO 10333-5.NOTE 1 Further standards are in preparation for other types of PPE: ISO 10333-6 and ISO 14566 (see bibliography).Anchor devices are rated to sustain a maximum (dynamic) arresting force of 6,0 kN, and a maximum (static) loading of1,0 kN (assuming a person of 100 kg mass) in post-fall arrest suspension, work-positioning mode, or restraint mode.Anchor devices are intended for single person use only. A rescuer should not attach to the same anchor device as aperson being rescued, unless the anchor device has been specifically designed for such purposes, and the instructionsfor use specifically permit this application.NOTE 2 Vertical rigid or flexible line systems and horizontal lifelines are not within the scope of this International Standard,but are covered in ISO 10333-4 and ISO 16024.
Keywords:
GeneralInformation
Status: Active ChangeNumber: 1 InternationalClassificationCodeOfStandards: 13.340.60 TechnicalCommittee: ISO/TC 94 ActivatedDate: 06.08.2018 PagesCount: 27 Language: en

BuyStandard

Price 326.06 AZN

VAT 58.69 AZN

Sum 384.75 AZN

AddToCart