ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method

Annotation Preview

This document specifies two procedures for the determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of temperature and load. Procedure A is a mass-measurement method. Procedure B is a displacement-measurement method. Normally, the test conditions for measurement of melt flow rate are specified in the material standard with a reference to this document. The test conditions normally used for thermoplastics are listed in Annex A. The MVR is particularly useful when comparing materials of different filler content and when comparing filled with unfilled thermoplastics. The MFR can be determined from MVR measurements, or vice versa, provided the melt density at the test temperature is known. This document is also possibly applicable to thermoplastics for which the rheological behaviour is affected during the measurement by phenomena such as hydrolysis (chain scission), condensation and cross-linking, but only if the effect is limited in extent and only if the repeatability and reproducibility are within an acceptable range. For materials which show significantly affected rheological behaviour during testing, this document is not appropriate. In such cases, ISO 1133-2 applies.
Keywords: Plastics, melt mass-flow rate (MFR), determination
GeneralInformation
Status: NotTemporaryActive ChangeNumber: InternationalClassificationCodeOfStandards: 83.080.20 TechnicalCommittee: ISO/TC 61/SC 5 ICS : 83.080.20 ActivatedDate: 23.06.2022 PagesCount: 34 Language: en

BuyStandard

Price 326.06 AZN

VAT 58.69 AZN

Sum 384.75 AZN

AddToCart

AlsoInterestYou
ISO ISO 11535:2006
Language: en PublishedDate: 15.12.2006 ActivatedDate: 15.12.2006 ChangeNumber:
Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method
Details AddToCart
ISO ISO/TR 16043:2015
Language: en PublishedDate: 15.10.2018 ActivatedDate: 15.10.2018 ChangeNumber:
Iron ores — Determination of chlorine content — X-ray fluorescence spectrometric method
Details AddToCart
ISO ISO 8503-5:2017
Language: en PublishedDate: 02.03.2017 ActivatedDate: 02.03.2017 ChangeNumber:
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile
Details AddToCart
ISO ISO/TS 22171:2023
Language: en PublishedDate: 04.12.2023 ActivatedDate: 04.12.2023 ChangeNumber:
Soil quality — Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at pH 7, using a molar ammonium acetate solution
Details AddToCart
ISO ISO 32679:2024
Language: en PublishedDate: 17.06.2024 ActivatedDate: 17.06.2024 ChangeNumber:
Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
Details AddToCart