ISO 1519:2011 Paints and varnishes. Bend test (cylindrical mandrel)

Annotation Preview

This International Standard specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions. For a multi-coat system, each coat can be tested separately or the complete system can be tested. The method specified can be carried out ⎯ either as a “pass/fail” test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement; ⎯ or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate. Two types of apparatus are specified, type 1 being appropriate for use on test panels of thickness up to 0,3 mm, and type 2 for use on test panels of thickness up to 1,0 mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.
Keywords: Paints and varnishes
GeneralInformation
Status: NotTemporaryActive ChangeNumber: InternationalClassificationCodeOfStandards: 87.040 TechnicalCommittee: ISO/TC 35/SC 9 ActivatedDate: 06.01.2011 PagesCount: 9 Language: en

BuyStandard

Price 136.73 AZN

VAT 24.61 AZN

Sum 161.34 AZN

AddToCart

AlsoInterestYou
ISO ISO 4624:2023
Language: en PublishedDate: 12.06.2023 ActivatedDate: 12.06.2023 ChangeNumber:
Paints and varnishes — Pull-off test for adhesion
Details AddToCart